Looking a stylish makeover of your cupboard or going for kitchen cupboard paint?
Regular use of kitchen cupboard makes it under go wear and tear that causes the surface to be worn out and turn dull for many practical reasons.
In this case, instead of going for a new cupboard, you can furnish the surface with vinyl and make it look fresh and pristine forever.
Why vinyl is perfect for kitchen cupboard handles and doors?
Covering a kitchen cupboard with vinyl paper is a new fashion that makes an updated and smooth look to the cupboards.
Vinyl coatings provide inexpensive and efficient solutions for damaged cabinets. Have a look why vinyl is the most loved choice.
- Vinyl papers are readily available on the market at cost-effective prices.
- They are durable, easy to handle, attach and remove.
- People prefer vinyl paper coverings because it is a straightforward and economical choice.
- They come in different designs and textures.
Steps to Cover Kitchen Cupboard Doors With Vinyl
Vinyl transforms the entire look of a kitchen. You can easily attach the vinyl yourself by reading the further guide.
- Remove the cupboard door
Vinyl can be pasted more frequently if the cabinet door is removed before the process.
Unscrew the hinges using a screwdriver. Place the attachments somewhere safe to prevent misplacement.
- Remove the handle
The second thing to keep in mind when covering the vinyl closet is to take the door handles off to ensure that the paper can be glued evenly across the entire surface.
Turn the screw counter-clockwise and keep them in a safe place.
- Clean the door
Clean your cabinet door thoroughly by using a good detergent or cleaner. Soak a sponge in water and clean the door surface properly.
Remove any dirt, stains and patches from the material to obtain a smoother vinyl texture. It will let the vinyl binds more strongly.
A dirty surface is not easy to be fixed to a vinyl, proceed with this step perfectly.
- Measure the door
Now you can make measurements from the area you wish to be covered with vinyl.
Using a measuring scale, calculate the accurate length and width. Mark the points on the vinyl sheets.
- Cut the Sheets
Make an elegant cut using a pointed knife on the vinyl. You can also use scissors directly above the marking points and cut the sheet.
- Paste the vinyl
The cupboard is now ready to have a new look. Position it on a safe or an empty table.
Paste the vinyl over the desired area.
- Remove the air bubbles
Remove the air trapped into the sheets by pressing it down on the surface.
Lightly move your hands and fingers over the sheets to make sure they are airtight.
- Leave the door
Well done!
You can now leave the door for 3-4 hours to let the paste sink in. The sunlight can rapid and enhance the attachment process.
- Fix the handles
Screw the handles in place using a screwdriver. Double-check the position of the grips.
- Fit the cupboard
Attach the hinges to the inner cabinet and door with care. Tighten the screws using a screwdriver.
Bottom Line
Wasn’t that super easy to cover kitchen cupboard doors with vinyl! Yes it was indeed.
Follow these steps for a perfect DIY that turn your cupboard new and stunning.
