A dripping kitchen mixer tap can create a huge mess.
It makes unnecessary voices all around the place.
When you cannot stop the flow, it can annoy your head and add to a lot of water wastage.
You can quickly fix a dripping mixer tap using the right parts and tools.
Tools need to fix a dripping kitchen tap:
- Adjustable wrench
- A Cloth
- Screwdriver
Your Guide to Fix dripping kitchen tap easily
Read the following tips:
Isolate the water supply
To begin with, turn off the tap and water supply properly.
Find the shut-off valve and turn it off.
Running water can cause a mess and interrupt the procedure.
Let the water escape to the sink, left in the pipes.
Remove the Cartridge to examine its condition.
The first thing you are supposed to solve kitchen tap dripping is by examining the Cartridge.
Water flow can build corrosion layers and dust particles that make a faucet malfunction and cause leaks.
Remove the handle with an adjustable wrench.
Remove the Cartridge from a faucet.
Carefully discard the O-ring and rubber washer, and place them somewhere by memorizing the exact positions.
Soak the Cartridge in hot water and clean it thoroughly.
Assemble all the parts of a kitchen mixer tap
Please take all the small pieces from the tap cartridge and start placing them correctly in a sequence.
Make sure you do not cause damage to tiny parts during the installation and cleaning process.
Put the rubber washer and O-ring around.
Assemble the pieces to form a single unit.
Clean the tap handles
It is a good time for cleaning tap sitting and handles.
Use a cloth to clean off the dust on the surface of the faucet handle.
You must use a brush to remove the dirt placed in narrow sections.
Rinse the area with clean water.
Put the Cartridge back on the tap.
Tighten and secure the units with your fingers and then tools.
Rotate the Cartridge until properly adjusted and cover it with the handle of a kitchen tap.
Fix the screw to the kitchen faucet handle; a loose screw may make the faucet drip, so carefully fix it.
Replacing washer to fix kitchen mixer tap dripping
If the above method fails, you may adopt the following and easiest way to fix a dripping kitchen mixer tap. For this, you need:
- Rubber Washers
- A Knife
- Scissors
The handle and round must be removed to reach the rubber washer.
Most modular taps operate with ceramic discs instead of using a rubber washer.
In such a case, you go with replacing the ceramic discs for fixing a draining kitchen tap.
- Cut the old rubber washer with scissors or take it out with a knife, following the proper safety precautions.
- Take a suitably sized rubber washer and attach it neatly and firmly to your faucet.
What is a mixer kitchen tap?
Mixer taps have multiple water lines serving hot and cold water supplies.
They are usually installed in households, primarily commercial kitchens, to improve the kitchen’s functioning and vision.
The water flow offered by the mixer taps is commendable and has a foam-like output.
Modern mixer taps are hard to find disturbing and defective, but when they do, the reason can be old fitting or damaged assembly of a mixer tap.
The Conclusion
Now you know how to fix a dripping kitchen tap.
Attach the assembled appliance to the valve’s handle and check if our fitting works.
Once you are done, pat yourself on the back. You can always reach out to an expert to operate your faucet if you don’t want to work alone.