The installation of a kitchen sink can be a tricky task for a beginner since it includes the connection of pipes, tap, and drainer. Otherwise, fixing a sink on the work surface is pretty simple.
Easy Ways to Install a Kitchen Sink
If you are searching for a simple guide to installing a kitchen sink, you must continue to read the steps below.
Take Measurements
- Using a marker and measurement tape, take the kitchen sink and counter calculations.
- Position the sink upside down on the counter and mark the correct alignments on the material.
- Also, make the measurements of the drain holes in the sink.
Cut The Surface
- Double-check the marking points and measurements of the sink.
- Take a jigsaw and cut along the marked lines.
- It will provide space to set up a kitchen sink.
Install The Faucet
- Before putting a sink in the right place, install the faucet and drip tray in the sink.
- Attach the faucet securely using an adjustable wrench.
- Use clay or any waterproof adhesive to attach the drain properly to the sink.
Place The Sink
- Carefully place the sink on the work surface by lifting it with both hands.
- Do not attach any water inlets before placing the sink.
Secure The Sink
- Use a grout mixture to secure a sink attached to the counter.
- Tighten the nut and bolts if the sink is fitted with metal mounting hardware.
Install The Water Pipes
- Under the drain point, secure the water hoses and connect them to the main water supply.
- Connect complete portions of water passage lines using a wrench.
Connect to Water Supply
- After securely connecting the water inlets to the sink, connect the hoses to the main supply.
- Tighten each screw to avoid leaking or dripping.
